The Ghost Immobiliser
Immobilisers can be a powerful weapon in the fight against car theft. They stop the car from starting if it isn't equipped with a key fob. They also help to stop hotwiring or traditional forms of vehicle theft. Newer methods such as relay theft or key cloning are becoming more prevalent.
Created to counter these current trends The ghost immobiliser is designed to make your vehicle completely undetectable. It's silent and stealthy and does not use key fobs, radio signals or LED indicators.
Easy to install
The Ghost Immobiliser is an innovative device that connects to the CAN data network inside your vehicle to stop key cloning and theft. It is a TASSA-approved product and insurance companies also endorse it. It is almost undetectable by thieves and operates silently. It uses buttons on your steering wheel, the centre console, and doors to create a unique pin code that must be entered before you can start your vehicle. You can create as many as 20 different sequences to increase security. The system is easy to install and doesn't require additional hardware.
To ensure the highest quality results it is recommended you select a reputable CAN immobiliser installer who is skilled in your specific vehicle. Ideally, they will have a workshop close to you where you can visit to have your installation completed. They'll also have a range of tools and equipment to aid you with the installation process. They will have basic hand tools, multimeters insulation tape and heat shrink tubing to safeguard connections. A user's manual will offer instructions specific to the wiring of your vehicle.
Connect the battery prior to beginning the installation process to avoid short circuits or airbag deployment. It is crucial to confirm the exact location of the CAN H and CAN L wires, since the wrong identification could result in unintentional system integration. It is also a good idea to mark the wires with tiny pieces of tape or label them with labels. Also, utilize a multimeter for verification that the identified power source provides a consistent 12V supply.
Advanced thieves employ a variety of strategies to get around Ghost Immobilisers, such as jamming or spoofing. These methods are based on amplifying the signal sent from your key fob to the vehicle's electronic control unit. With the help of advanced anti-jamming technologies and a constant monitoring you can shield your vehicle from these sophisticated attacks.
Security Increased
Ghost immobilisers are an extra layer to protect your car against theft. It has a PIN security system that can be entered via buttons on your steering wheel or dashboard, making it harder for thieves to take your car. The device is also designed to be hidden in your vehicle, with no lights or other indicators that could alert a potential thief to its presence. It communicates with your vehicle's ECU on the data bus, so it is not susceptible to the same hacking and relay attacks that could disable conventional security systems.
It is a great option for those who own prestige cars that are at a higher chance of being stolen due to their worth and the popularity of their vehicles. The enhanced features of the system protect your vehicle from key cloning and ECU swapping. Some ghost immobilisers can also be linked to an app, which means that you can easily arm and disarm them. They also come with an option for service/valet that allows you to temporarily disable them while your vehicle is being serviced or repaired.
Another advantage of ghost immobilisers is that it doesn't require wire cutting. This is a fantastic option, particularly if your vehicle is newer and doesn't come with an immobiliser. Some systems can also integrate with GPS tracking devices, providing additional security to your vehicle. The use of a GPS tracker can also aid in reducing your insurance premiums. If you choose to buy an immobiliser that is ghost, make sure it is TASSA-verified and that an experienced installer installs the device for you.
Compatible with all major brands and models
The Ghost Immobiliser was designed to work with all major models and makes, safeguarding your prized possessions from theft. It utilizes buttons on your steering wheel, the centre console or door panels to generate a unique pin code, that must be entered before you can drive your vehicle. It is tamperproof and undetectable, and is backed by three-year guarantee. It is also fully accredited by insurance companies This means that it can help to lower your premiums.
In contrast to standard immobilisers that utilize your key fob to control the car's ignition and ignition, the Ghost system operates by directly connecting to the engine controller unit through the CAN data bus. This means that it is tamper proof, virtually impossible to remove or disable and cannot be targeted by organized car theft criminal gangs. The Ghost system can also be paired with an iPhone app to monitor remotely and management.
You can design an PIN that is easy to remember, but mathematically impossible to guess for thieves. You can modify and modify the PIN at any time to ensure your vehicle's security even when it's parked in a parking lot or on the street. You can also select a valet or service mode in case you need someone other than you to drive your car temporarily, for example when it's in the garage for maintenance. This feature will also help to prevent your vehicle from being stolen by a dishonest mechanic. To ensure your peace of mind, you can opt for a Ghost call alert which will notify you if your vehicle is in motion or if it has been moved.
Convenience
The ghost immobiliser is an efficient security device, protecting your vehicle from typical methods of theft like key cloning and relay attacks. It works by connecting with the vehicle's data network CAN, and blocking communication with engine ECU. This makes it impossible for thieves to clone or hack your car, making the installation of this system a smart idea for all drivers.
After installation, you'll be required to enter a PIN code that is up to 20 digits using the buttons on your dashboard and the steering wheel in order to start the engine. The system is completely concealed and thus unnoticeable to thieves. It doesn't emit radio frequency signals. It is also able to be set to an individual-changeable PIN code which further enhances its security. The system is also designed to avoid cutting of circuits, making it virtually impossible to hack into.
If you do happen to forget your PIN, there are some systems that allow you to communicate with the immobiliser using an app on your phone to disarm it immediately. Some systems even have a service/valet setting that allows you temporarily to start your car for instance, if you drop it off at Valet Park or a garage.
The Ghost Immobiliser also is undetectable by thieves, since it doesn't transmit radio signals. This is a significant benefit over other aftermarket security systems. It is also simple to use and doesn't require complex wiring. It can also be used in conjunction with a dash cam to provide additional security. Dash cams include the Thinkware F70, which features clear and sharp 1080p HD dashcam footage and Format Free Technology and parking mode. The system is able to be hardwired to guarantee maximum performance and longevity.
Installation
If you want to protect your vehicle from thieves it is important to select the right immobiliser. This device can prevent car theft by blocking the communication between the engine controller unit (ECU) and key fobs. This device blocks thieves from stealing and cloning the signal used to start your vehicle. It also detects any time it has been tampered with and alert the owner of the vehicle.
The device is easy to install and can be integrated with the vehicle's existing systems. It doesn't require any modifications to the wiring in your vehicle and can be hidden in a secluded location, such as under the dashboard. To ensure that the device has been properly installed, follow instructions in the user's manual. After installation, it's crucial to test the system. This will confirm that the immobiliser ghost is functioning as intended.
auto ghost immobiliser can purchase an Autowatch Ghost 2 immobiliser from an approved installer and get it installed in your vehicle. The installer will connect Ghost to your vehicle's CAN Bus system, making it difficult for thieves to steal the system or bypass it. The installation process usually takes 2-3 hours.
During the process of installation it is recommended that you consult the wiring diagram for the model of your vehicle. This will help you identify the CAN High and the CAN Low wires needed to connect your Ghost to the engine of your vehicle. Check all connections to ensure that they're secure and insulated.
Once the installation has been completed, you can begin using the Ghost Immobiliser normally. It will turn off the ignition of your vehicle if it is not started with the correct PIN code, which you can assign yourself. The immobiliser ghost can be set to Service/Valet Mode for when you need your vehicle cleaned or valet parking.